Starting Calc'nclean - Siemens TI 303 Mode D'emploi

Starting Calc'nClean

Duration: approx. 40 minutes
c e p r o g r a m m e C a l c ' n C l e a n s e r v i
Press and hold the calc'nClean
1.
button for approx. 5 seconds.
( symbol lights up.
Open the door, remove the drip tray
2.
and coffee grounds container and
empty.
Remove and clean the brewing unit.
3.
Place a Siemens cleaning tablet in
4.
the brewing unit and re-insert the
unit.
Re-insert the drip tray and coffee
5.
grounds container and close the
door.
) symbol lights up.
Pour 0.5 litres of lukewarm water
6.
into the empty water tank up to the
mark and dissolve a Siemens
descaling tablet in it.
Re-insert the water tank and place a
7.
large container (approx. 1 litre)
under the outlet system.
calc'nClean flashes, touch
8.
calc'nClean.
The programme starts, cleans and
descales the appliance. calc'nClean
pulses. Duration approx. 20 minutes.
( symbol lights up.
Empty the container, open the door,
9.
empty the drip tray and re-insert.
Close the door and place a
10.
container under the outlet system.
) symbol lights up.
Service programmes en
Clean the water tank and fill with
11.
fresh, still water up to the "max"
mark. Place the container under the
outlet system again.
calc'nClean flashes, touch
12.
calc'nClean.
The programme starts and then cleans
and rinses the appliance. calc'nClean
pulses. Duration approx. 20 minutes.
( symbol lights up.
Empty, clean and re-insert the drip
13.
tray and coffee grounds container.
The programme has finished. The
appliance is ready for use again.
23