450, Avenue de l'Europe – ZIRST – F-38330 MONTBONNOT
Title :
I.
PRODUCT CERTIFICATE
(To be filled out by the purchaser or by the user of the product)
Reference
Year of manufacture :
Serial number:
Date of purchase:
Date of first use :
Name of user:
REMARKS :
II.
CONFORMITY / REFERENCE TEXTS
European Directive N° 89/686/EC about "Personal Protective Equipment."
Relevant sections of EN 353-2 about "Guided Fall Arresters on Flexible Anchor Lines."
EC type test certificates are issued by:
CETE APAVE SUD EUROPE 8, Rue Jean Jacques Vernazza - BP 193 – 13322 MARSEILLE CEDEX 16- France - (Identification N°0082).
The quality system of the manufacturer is certified by:
AFNOR CERTIFICATION – 11, rue Francis de Pressensé - 93571 La Plaine Saint-Denis Cedex – France - (Identification N°0333).
III.
DESCRIPTION
The Modulator is a fall arrester on a flexible anchor line. It allows safe movement on sloped or plane surfaces (slope roofs, flat roofs) with no risks of slipping, or
falling from/through the roofs.
It weighs 270 grams. The flanges (1 and 2), and the control handle (3) are made of hot pressed stainless steel.
The eccentric (4) is in aluminium.
The Modulator runs along a specific flexible static rope (diameter 11mm, breaking strength of 2600 daN).
IV.
COMPOSITION OF SERIAL NUMBER/ MARKING :
AA = year of manufacture
=
Invitation to read these directions for use.
EC 0333
=
EC marking and number of the authorized body which controls the conformity to quality standards.
For the rope, the coloured thread indicates the manufacturing year:
2003
2004
2005
Orange
Yellow
green
2014
2015
Green
Yellow
Exceptionally, the manufacturing year may be indicated on a ring stuck next to the label. This ring has priority over the colour of the thread.
V.
INSTALLING AND ADJUSTING THE MODULATOR
a -
Unlock the device by turning the free flange (2) at right angle to the main flange (1).
b -
Once the control handle (3) is directed to the main flange (1), make the eccentric (4) swivel outwards, around its axis (5). It features a stop to limit its
opening.
c -
Place the tight strand of the rope towards the handle.
d -
Grab the slack strand of the rope, wind it around the eccentric (4), and then around the main axis (6).
e -
Lower the free flange (2), so that its end is superposed to that of the main flange.
f -
Tie the rope to the hanging element by passing a connector through the flanges holes (7).
By doing so, any accidental opening is impossible.
Etabli par :
GAMESYSTEM
www.gamesystem.com
MODULATOR
BB= month of manufacture
2006
2007
Turquoise
Purple
2016
2017
Marine
Shark grey
A.Cuny
AABB.XXXX
2008
2009
2010
Shark grey
Gold
Black
2018
2019
Coqueliquot
Turquoise
Approuvé par :
DIRECTIONS FOR USE
N° :
G1200
Index :
I - 04/10/2016
Date :
26/06/2006
XXXX = serial number
2011
2012
Royal
Red
blue
2020
2021
Gold
Black
B.Cuny
fiche n° G1009b
2013
Orange
2022
Red