Maxspect LED JUMP Série Mode D'emploi page 13

Password Setting
If a fixture connected to router with Internet connection, it can be seen by all
•
mobile devices as long as they are connected to the same network, no matter
whether they are logged in or not. For the mobile device(s) which is(are) logged
in, only the one to which the fixture is bonded can control the fixture. For the
mobile device(s) which is(are) NOT logged in, all of them can control the fixture as
long as it has no password.
If a fixture connected to router WITHOUT Internet connection, all mobile devices
•
connected to the same network can control the fixture as long as it has no
password.
If a fixture directly connected to multiple mobile devices, all of them can control
•
the fixture as long as it has no password.
In summary, a password can prevent the fixture from being controlled by other
mobile devices while they don't have the password. Follow below steps to set
password for a fixture.
1. In all case, choose the fixture you want to set password;
2. Click"∙∙∙"on the right upside of the APP;
3. Choose "Change Password";
4. Input password(at most 16 digits) and confirm.
Share the Setting of Illumination
SYNA-G CLOUD APP offers a function that allows you to share the illuminating
setting of Manual Mode or Auto Mode with your friends. This function can ONLY be
used in Router Mode with Internet connection.
1. Open the APP and log in;
2. Select the fixture which you want to share the setting on the equipment list;
3. Either in the Manual or Automatic Working Mode, click
downside of the APP;
4. Select , then a QR code for the setting is generated*;
5. On your friend's mobile device, if the setting you share is for Automatic
Working Mode, enter the same working mode of the fixture your friend wants
to use the setting;
6. Click on the right downside of the APP;
Operating Instructions
on the right
11
EN