Fabric Setting Chart; Ironing Temperature Setting Guide - H.Koenig V6 Manuel D'utilisation

Temperature
Setting
Synthetics,
Fabric
Silk, Nylon,
Arcrylic,
Acetate
lroning Dry
Instruction
lroning
Steam
Selection
Follow up the ironing instructions on the garment label. If there is not any instruction
1.
label, but you know what kind of the fabric is, please refer to the fabric setting chart
described in this instruction manuai.
The fabric setting chart is only validfor plain fabrics and not for materials to which
2.
finishes, glosses etc., have been applied. Textile to which some kind of finish has been
applied (gloss, crinkle, relief etc.) is best ironed at lower temperature
First sort laundry according to ironing temperature setting guide: wool with wool,
3.
cotton with cotton, etc.
The iron heats up more quickly than it cools down.
4.
need to be ironed at the lowest temperature, such as those made of synthetic fibres.
If the fabric consists of various kinds of fibres, always select the temperature
5.
required by the most delicate fibres, i.e.the lowest temperature. If, for example, an
article consists of 60% polyester and 40% cotton, according to the fabric setting chart it
should be ironed for polyester.

Fabric Setting Chart

Nylon Polyester
Wool
Polyester
Dry iron
on the
wrong side
of the
fabric
/

Ironing Temperature Setting Guide

Rayon Cotton
Synthetic,
Cotton
Wool
Wool
Polyester
Steam Steam
lroning lroning
Therefore, start ironing articles that
Linen
Polyester
Cotton
Linen
Steam
lroning