H.Koenig V6 Manuel D'utilisation page 11

Replacement of filter
Method: SIide water tank out from base unit, take the filter out from water tank, and then
replace with a new one. After new filter has been installed well into water tank, fill water into
water tank to Max fill level, and then slide water tank back into base unit. (Immerse filter in
water for several minutes in order to gain better performance in future use.
Anti-calc system
The filter is designed to reduce the buildup of limescale which occurs during steam
1.
ironing, this will prolong the working life of your iron. However, please note that the filter
will not completely stop the natural process of limescales build-up.
The filter should be replaced with a new one after two - three months.
2.
filter can still be used continuously.
steam chamber, This happens always depending on your local water quality. 1 t is proposed that
replace filter as soon as possible or mix your water with
Emptying and storing
Disconnect the appliance from the power supply and allow the appliance to cool down for 60
1.
minutes at least.
After use, siide out the water tank and pour out all the remaining water.
2.
Wind the power cord around cord storage of the base unit.
3.
The iron should be place on the iron rest plate and they can store together.
4.
Cleaning and Maintenance
Unplug the appliance tram the main supply and let the iron cool down.
1.
Clean the iron with a damp cloth.
2.
Wipe off scale and any other deposits on the soleplate with a damp cloth or non-abrasive (liquid)
3.
cleaner. Never clean the appliance under the tap water.
However, limescales may be most probably built up in
Before
50% proportion of distilled water.
replace, the