Upper Compartment Features; Upper Compartment Shelf; Upper Compartment Floor; Lower Compartment Features - Whirlpool Gladiator FREEZERATOR GAFZ21XXMK01 Guide D'utilisation Et D'entretien

Give your convertible refrigerator/freezer time to cool down
completely before adding food. It is best to wait 24 hours before
you put food into the convertible refrigerator/freezer.
If you add food before the convertible refrigerator/freezer has
cooled completely, your food may spoil. Adjusting the Lower and
Upper Compartment Controls to a colder than recommended
setting will not cool the compartments any faster.
Adjusting Controls
The settings indicated in the previous section should be correct for
normal household usage. The controls are set correctly when milk or
juice is as cold as you like and when ice cream is firm.
If the temperature is too warm or too cold in the lower or upper
compartment, first check the air vents to be sure they are not
blocked.
If you need to adjust temperatures, use the settings listed in the chart
below as a guide. Wait at least 24 hours between adjustments and
then recheck the temperatures.
CONDITION/REASON:
LOWER COMPARTMENT section
too warm
- Door opened often, large amount
of food added or room temperature
very warm
UPPER COMPARTMENT section
too warm
- Door opened often, or large
amount of food added or very cold
room temperature (can't cycle often
enough)
LOWER COMPARTMENT section
too cold
- Controls not set correctly for your
conditions
UPPER COMPARTMENT section too
cold
- Controls not set correctly for your
conditions
UPPER COMPARTMENT
FEATURES
Your model may have some or all of these features. Features that can
be purchased separately as product accessories are labeled with the
word "Accessory." Not all accessories will fit all models. If you are
interested in purchasing one of the accessories, please call the toll-
free number on the cover or in the "Assistance or Service" section.

Upper Compartment Shelf

To remove and replace the shelf:
1. Remove the shelf by lifting the entire shelf slightly and move it all
the way to one side. Tilt the other side up and out of the shelf
supports.
2. Replace the shelf by inserting one end all the way into the center
of the shelf supports. Then, lower the other end of the shelf and
insert it into the shelf supports.
10
ADJUSTMENT:
Adjust LOWER
COMPARTMENT Control
toward coldest.
If in Refrigerator Mode,
adjust UPPER
COMPARTMENT Control
toward coldest.
If in Freeze mode, adjust
LOWER COMPARTMENT
Control toward coldest.
Adjust UPPER
COMPARTMENT Control
toward cold.
If in REFRIGERATOR
Mode adjust UPPER
COMPARTMENT Control
toward cold.
If in Freeze mode, adjust
LOWER COMPARTMENT
Control toward cold.
NOTE: The shelf should lower slightly and lock into place. If the shelf
does not appear stable, make sure both ends of the shelf are
inserted into the shelf supports.

Upper Compartment Floor

To remove and replace the upper compartment floor:
1. Remove all items from the compartment floor.
2. Remove the floor by raising the front and lifting it out.
3. Replace the floor by inserting the two rear tabs into the holes in
the rear of the lower compartment. Lower the floor onto the liner
of the lower compartment.
LOWER COMPARTMENT
FEATURES
Your model may have some or all of these features. Features that can
be purchased separately as product accessories are labeled with the
word "Accessory." Not all accessories will fit all models. If you are
interested in purchasing one of the accessories, please call the toll-
free number on the cover or in the "Assistance or Service" section.

Shelves

The shelves in your convertible refrigerator/freezer are adjustable to
match your individual storage needs.
Storing similar food items together in your convertible refrigerator/
freezer and adjusting the shelves to fit different heights of items will
make finding the exact item you want easier. It will also reduce the
amount of time the convertible refrigerator/freezer door is open, and
save energy.
To remove and replace a shelf:
1. Remove the shelf by tilting it up at the front and lifting it out of the
shelf supports.
2. Replace the shelf by guiding the rear shelf hooks into the shelf
supports. Tilt the front of the shelf up until rear shelf hooks drop
into the shelf supports. Check to make sure that the shelf is
securely in position.