Problem
There are stains and dry wa-
ter drops on glasses and
dishes.
The dishes are wet.
12. TECHNICAL INFORMATION
Dimensions
Electrical connection
Water supply pressure
Water supply
Capacity
Power consumption
Power consumption
1) Refer to the rating plate for other values.
2) If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian energy),
use the hot water supply to decrease energy consumption.
13. ENVIRONMENT CONCERNS
Recycle the materials with the symbol
Put the packaging in applicable containers
to recycle it. Help protect the environment
and human health and to recycle waste of
electrical and electronic appliances. Do
Refer to "Hints and tips" for
other possible causes.
1)
Possible solution
• The released quantity of rinse aid is not sufficient.
Adjust the rinse aid selector to a higher position.
• The quality of the rinse aid can be the cause.
• The programme does not have a drying phase or
has a drying phase with low temperature.
• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the cause.
Width / height / depth
(mm)
Voltage (V)
Frequency (Hz)
Min. / max. bar (MPa)
Cold water or hot water
Place settings
Left-on mode (W)
Off-mode (W)
not dispose appliances marked with the
.
symbol
Return the product to your local recycling
facility or contact your municipal office.
ENGLISH
600 / 850 / 625
220 - 240
50
0.5 (0.05) / 8 (0.8)
max 60 °C
2)
13
0.50
0.50
with the household waste.
17