Ordering Replacement Parts - EINHELL SB 701 Mode D'emploi

Anleitung SB 701
7.3 Depth setting
The drilling spindle has a rotatable scale ring for
setting the drilling depth.
Make adjustments only when the machine is at a
standstill.
1. Press the spindle down until the tip of the bit
rests on the workpiece.
2. Turn the scale ring (25) up to the stop.
3. Reset the required dimension and tighten the
clamping screw (29).
4. After switching on, you can now drill to the
desired depth up to the stop.
7.4 Hinged chip guard
The SB 701 is supplied with a hinged chip guard,
which has to be fitted as follows:
Undo the screw on the chip guard and push the ring
onto the machine spindle as illustrated. Now align
the guard to the front and clamp tight. The height of
the guard is infinitely adjustable. Push up the guard
to change the bit, and push the guard down again
before switching the machine back on.
7.5 Care and maintenance
There is no need to lubricate the bearings of the
SB 701. All the ball bearings are greased for life.
Lubricate all moving parts and threads regularly with
a drop of acid-free lubricating oil.
Use only a brush or rag to clean the machine.
Never use solvents to clean the painted parts.
Treat bare parts regularly with anti-corrosion agent.
13.11.2001 14:03 Uhr Seite 9
7.6 Speed settings
The list below will help you select the right speed for
various materials.
The speeds quoted are guidelines alone.
Bit Gray Steel
diameter cast iron
3 2550 1600
4 1900 1200
5 1530 955
6 1270 800
7 1090 680
8 960 600
9 850 530
10 765 480
11 700 435
12 640 400
13 590 370
14 545 340
16 480 300
18 425 265
20 380 240
22 350 220
25 305 190

8. Ordering replacement parts

When ordering replacement parts, please quote the
following data:
1. Type of product
2. Article No.
3. Ident. No.
4. Number of the required replacement part
GB
Iron Aluminium Bronze
2230 9500 8000
1680 7200 6000
1340 5700 4800
1100 4800 4000
960 4100 3400
840 3600 3000
740 3200 2650
670 2860 2400
610 2600 2170
560 2400 2000
515 2200 1840
480 2000 1700
420 1800 1500
370 1600 1300
335 1400 1200
305 1300 1100
270 1150 950
9