How Does It Work - Marmitek VIDEOCONTROL3 Guide Utilisateur

the remote control, but do not want to go to the living room. The infra-red extender
VideoControl3 transmits the infra-red signals to the equipment via the COAX cable net-
work.
Set content
• 1 VideoControl3 infra-red receiver with 1 IR LED (IR receiver)
• 1 VideoControl3 infra-red transmitter with 3 IR LEDs (IR emitter)
• 2 power adapters
• Coax extension plugs (IEC-F) male and female
• This user manual

How does it work?

The VideoControl3 transmits the signal from your own remote control back to the
other room via the existing antenna cable. The VideoControl3 consists of an infra-red
receiver and an infra-red transmitter. The receiver is connected to the antenna connec-
tion of a TV (e.g. in the bedroom).
The transmitter is connected to the antenna connection of e.g. the satellite receiver.
You can control up to three different devices (e.g. a satellite receiver, a VCR and a
decoder) using the three infra-red LEDS. If desired, you can place multiple infra-red
receivers in different rooms, to control your video equipment from each TV in your
house.
NOTE: The Marmitek VideoControl3 signal is carried via all antenna boxers, splitters
and antenna amplifiers suitable for a return channel.
4 © MARMITEK