Main Switch; Cleaning And Maintenance - Carmen HD500 Mode D'emploi

Main switch

0 = the appliance is switched off
1 = 250 watts, large quantity of hot air, fixing
2 = 500 watts, large quantity of hot air, optimal drying
Position the hair drier over the hair to be styled; the printed
side of the hair drier is on the outside. The hair drier must be
positioned flat and not in a creased manner.
The air opening of the appliance is connected to the hair drier.
Insert the plug in the socket. Use the switch to regulate the
required temperature (position 1= 250 watts, position 2= 500
watts). If your hair is towel dry, we recommend using position 2
and if your hair is nearly dry, we recommend using position 1.
You can move freely with the hair drier within the length of the
mains cable.

Cleaning and maintenance

›
Remove the plug from the socket before you clean the appliance.
Never submerge the appliance in water. Ensure that the appliance
does not become dirty. Clean the air suction opening regularly
using a soft brush. Wipe the appliance using a moist cloth and dry
it with a soft cloth. Remove the accessories and clean them.
17 • English