Inspection / Maintenance; Manufacturer's Warranty; Spare Parts Lists - REMS Calc-Push Notice D'utilisation

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

eng

4.1

Maintenance

WARNING

Pull out the mains plug before maintenance work!

Clean the REMS Calc-Push regularly especially when it has not been in use

for a long time, see also 3. The pump unit (5) can be removed from the tank

(2) for cleaning by turning anti-clockwise (ﬁ g. 3). Store REMS Calc-Push free

from frost. Check hoses, hose connectors and seals for damage before every

use. Replace damaged hoses and seals. Seal hose end with the plugs for

storage.

Clean plastic parts (e.g. housing) only with REMS CleanM machine cleaner

(Art. No. 140119) or a mild soap and a damp cloth. Do not use household

cleaners. These often contain chemicals which can damage the plastic parts.

Never use petrol, turpentine, thinner or similar products for cleaning.

Make sure that liquids never get onto or inside the pump motor.

5. Faults

WARNING

Before eliminating the fault on the REMS Calc-Push, switch off the rocker switch (4) and pull out the mains plug!

5.1

Fault: Pump does not suck up or is not working.

Cause:

● Hose/hose connection is leaking.

● Hose is blocked.

● The tank (2) is empty.

● Power cable defective.

● Pump/motor defective.

5.2

Fault:

Pump builds up no pressure or does not pump the decalciﬁ cation solution.

Cause:

● Pumping height exceeded.

● Unsuitable decalciﬁ cation solution.

● Pump/motor defective.

6. Disposal

REMS Calc-Push may not be thrown in the domestic waste after use. It must

be disposed of properly by law.

7. Manufacturer's Warranty

The warranty period shall be 12 months from delivery of the new product to the

ﬁ rst user. The date of delivery shall be documented by the submission of the

original purchase documents, which must include the date of purchase and the

designation of the product. All functional defects occurring within the warranty

period, which are clearly the consequence of defects in production or materials,

will be remedied free of charge. The remedy of defects shall not extend or

renew the warranty period for the product. Damage attributable to natural wear

and tear, incorrect treatment or misuse, failure to observe the operational

instructions, unsuitable operating materials, excessive demand, use for unau-

thorized purposes, interventions by the customer or a third party or other

reasons, for which REMS is not responsible, shall be excluded from the warranty

Services under the warranty may only be provided by customer service stations

authorized for this purpose by REMS. Complaints will only be accepted if the

product is returned to a customer service station authorized by REMS without

prior interference in an unassembled condition. Replaced products and parts

shall become the property of REMS.

The user shall be responsible for the cost of shipping and returning the product.

The legal rights of the user, in particular the right to make claims against the

seller under the warranty terms, shall not be affected. This manufacturer's

warranty only applies for new products which are purchased in the European

Union, in Norway or in Switzerland.

This warranty is subject to German law with the exclusion of the United Nations

Convention on Contracts for the International Sales of Goods (CISG).

8. Spare parts lists

For spare parts lists, see www.rems.de → Downloads → Parts lists.

4.2