Beurer BC 54 Mode D'emploi page 37

• If you press the memory button M1
again, the last individual measurement
is displayed (in this example, measure-
ment 03).
• If you press the memory button M1 once more, you
can view your individual measured values.
• To switch the device off again, press the START/
STOP button .
You can exit the menu at any time by pressing the
START/STOP button
• To erase a user's memory, first select the user mem-
ory to be erased by pressing the M1 or M2 memory
button on the off device and confirm your selection
by pressing the START/STOP button
• The average value of all measurements appears on
the display; in parallel, A lights up.
• Press and hold down both memory buttons M1 and
M2 simultaneously for 5 seconds.
[L 00 appears on the display. All the val-
ues in the selected user memory have
now been deleted.
•
.
.
Transfer via Bluetooth
It is also possible to transfer the measured values saved
on the device to your smartphone via Bluetooth
You will need the " beurer Health Manager" app for this.
This is available in the Apple App Store and from Google
Play.
System requirements for the app
"beurer Health Manager":
• iOS ≥ 10.0, Android
• Bluetooth ≥ 4.0
®
List of compatible devices:
Proceed as follows to transfer values:
®
If Bluetooth is activated in the settings menu, the data is
transferred automatically after the measurement.
The symbol appears in the top left of the display (see
chapter „6. Initial use", section "Bluetooth
When connecting for the first time, a randomly-gen-
erated six-digit PIN code is displayed on device, and
at the same time an input field appears on the smart-
37
®
TM ≥ 5.0
® ").
.
®