Product Description - Maico EAQ 10/1 Instructions De Montage

Air quality controller EAQ 10/1
1. Scope of delivery
EAQ 10/1 unit, mounting instructions
2. Symbols used
Warning symbols
Danger to life.
Non-observance can lead to
death or serious
DANGER
Property damage.
NOTICE
Non-observance can lead to
property damage.
Other symbols
INFO symbol
i
Text passages marked with this
symbol contain important
information and tips.
● List symbol
List containing important infor-
mation on the relevant subject.
 Action symbol
List of work to be undertaken.
Follow the instructions provided
in the order stated.
Imprint: © Maico Elektroapparate-Fabrik GmbH.
We reserve the right to make technical
modifications without prior notice and do not
accept responsibility for any printing errors
3. Product information
Figure EAQ 10/1
1
2
3
bodily injuries.

Product description

Air quality controller for controlling fans,
depending on room air quality and switching
point setting (sensitivity).
With integrated air quality sensor for
establishing the concentration of various
gases and odours (e.g. carbon monoxide,
methane, hydrogen, alcohol, tobacco smoke).
Switching point is set to fine setting using
potentiometer [3] for starting up.
Ready for operation after approx. 5 minutes.
Reaction time of less than 1 minute. Overrun
time 1 to 3 minutes, depending on level of air
contamination.
4. Technical data
● See rating plate.
● Permissible ambient temperature 40 °C
Green LED: Display relay on/off.
LED on  fan on.
Red LED: Air quality display. The lighter
the red LED the worse the air.
Potentiometer: Air contamination
switching point.
GB
5