Basic safety instructions
• Visually inspect the device before using it to make sure that there is no external damage. Do
not operate the device if it is damaged.
• Keep the device away from moisture and do not allow liquids or objects to enter the device.
Disconnect the power supply adapter immediately if the device comes into contact with
liquids.
• Place the device on a flat, level surface.
• Do not place any objects on top of the device.
• Do not place the device in a hot, wet or very humid environment.
• The device requires adequate air circulation in order to function properly. During operation,
do not place the device on soft surfaces, carpets or other materials that might block air
circulation, and do not make any modifications to the device.
• Keep the cable away from hot surfaces and sharp edges.
• Make sure not to bend the cable or pull it too tightly.
• The electrical socket must be easily accessible so that the power supply adapter can be easily
unplugged in case of emergency.
• If you are not going to use the device for an extended period of time, switch off the device,
disconnect it from the power supply and store it in a clean, dry place that is away from direct
sunlight.
• Only use the included power supply adapter; otherwise the device may be damaged.
• Do not operate the device if the power supply adapter, connection cable or plug is damaged.
• Do not open the housing of the device or the power supply adapter under any circumstances.
There is a risk of electric shock if live connections are touched or if the electronic or mechanical
layout of the device is altered.
• Disconnect the power supply adapter from the power supply before cleaning the device,
during thunderstorms or in the event of a malfunction.
• Any repairs to the device should be left to specialists. Improper repair work invalidates any
warranty claims.
• Faulty components may be replaced with original spare parts only.
• Packaging materials may not be used as toys. There is a risk of suffocation.
D
5