Proper Use; Technical Data; Before Starting The Equipment - EINHELL GC-PH 2155 Mode D'emploi D'origine

3. Proper use

Important. This hedge trimmer is suitable for cut-
ting hedges, bushes and shrubs.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Engine type: ...............................2-stroke engine,
.................................. air-cooled, chrome cylinder
Engine output (max.): ...................0.7 kW / 1.0 hp
Displacement: .......................................... 25 cm
Idle speed of engine: ................. 3050 ± 350 min
Max. engine speed ............................10500 min
Weight (with empty tank): ...........................5.9 kg
Cutting length: ............................................55 cm
Cutting capacity (max.) ............................ 22 mm
Spark plug: .......................................... LG L8RTF
Max. cutting speed ......................... 2050 cuts/min
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with ISO 3477, ISO 11201.
L sound pressure level ........................ 91 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ........................ 105 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-mu s.
The impact of noise can cause damage to hea-
ring.
Vibration emission value (front handle)
2
a = 2.92 m/s
h
Vibration emission value (rear handle)
a = 3.37 m/s 2
h
K uncertainty = 1.5 m/s
2
GB
The speci ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the speci ed value
in exceptional circumstances.
The speci ed vibration value can be used to
compare the equipment with other electric power
tools.
The speci ed vibration value can be used for initi-
al assessment of a harmful e ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
3
-1
Caution!
-1
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.

5. Before starting the equipment

5.1 Assembly
The hedge trimmer is supplied fully assembled.
No assembly work is required.
To make it easier to control, the machine is tted
with a rotary handle that can be adjusted as re-
quired into positions at angles of -90°/0°/+90°. To
do this, press the lever (Fig. 5/Item B) downwards,
turn the rotary handle into the required position
and then allow the lever to rise and latch in place
again. The various adjustable positions facilitate
working above head height or in other places with
di erent access. Important: The rotary handle
may only be adjusted when the engine is swit-
ched o .
- 17 -