Elem Garden Technic SBE2201-2L Traduction Des Instructions D'origine page 77

10. Assemble the right blade inner guard on the supporting leg (A), with 2 semicircle head inner-hex screws(M6x12),
11. fasten the blade inner guard with 2 semicircle groove head screw (M5x12) and 2 spring washer(Ø5) , 2 washer
(Ø5) and do not fasten all the screws
12. Push the supporting leg (A) towards the blade, and make sure that the blade is in the center of the blade inner
guard, and turn on the blade by hand to make sure that the blade can not touch any parts.
13. Then fasten all the screws.
- 77 -