Machine Installation - Elem Garden Technic SBE2201-2L Traduction Des Instructions D'origine

4 Machine installation

Procedure 1
supporting leg (B)
supporting leg (A)
1. Align the two holes on the supporting leg (A) into the two holes on the supporting leg (B), and use 2 bolts
(M8X60), 4 flat washers (Ø8) and 2 locking nut (M8) to fasten these two legs together, and leave the supporting
leg to lie on the ground.
2.Mount the switch back on the motor plate by 4 Bolts (M4X55) and 4 washer(Ø4)
- 71 -