Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Specified Conditions Of Use
The circular saw for fi rewood is used for cross cutting
of fi rewood. It is necessary to follow all technical
specifi cations and safety instructions.
Pieces of wood that are too short, too light or too thin
to get caught by the barbs in the feed cradle must not
be processed by the machine.
Make sure there is nobody present
in the dangerous area. The minimum
Do not use this product in any other way as stated for
normal use.
Not observing general regulations in force and
instructions from this manual does not make the
manufacturer liable for damages.
Residual risks
Caution: There may still be some residual risks when
operating the machine despite complying with all
applicable design regulations.
• Risk of injury to fi ngers and hands. Never put
your hands in the saw blade area.
• Parts of workpieces and tools fl y off from damaged
tools: Wear eye protectors!
• Noise emission: It is necessary to wear ear
protectors!
• Wood dust emission: Wear a respirator!
• Risk prevention - mechanical equipment: All
dangerous moving parts (e.g. saw blade) are wrapped
with fi xed, safely attached safety equipment,
removable with a tool only. Residual risk: Risk of
injury if the fi xed, safely attached safety equipment
is removed from a running machine with a tool.
• Risk prevention - electrical equipment: All
conductive parts of the machine are insulated
against contact or wrapped with fi xed, safely
attached safety equipment, removable with a tool
only. Residual risk: Risk of electric shock if the fi xed,
safely attached cover removed from a running and
plugged machine.
• Risk prevention - wooden dust: The circular saw
may only be used outdoors. Residual risk: If the
circular saw is used in enclosed places, health can be
damaged as a result of inhaling wooden dust.
There may still be some hidden residual risks despite
all the preventive measures taken.
Residual risks may be minimised by following the
safety instructions and use as designated provisions
The machine may only be
operated by one person.
distance is 2 m.
Danger of injury !
- 60 -
and the Operating Instructions.
The exposure to dust is infl uenced by the type of
the material processed. It is important to use local
exhaust (catching near the source) and adjust well
the exhaust covers, guide elements and the grab
channels.
Dust produced during work is often harmful and must
not get in your body. Use the exhauster and wear an
appropriate respirator, too. Remove thoroughly any
deposited dust, e.g. by vacuuming.
Use saw blades designed to reduce emitted noise.
Keep the machine and saw blade running.
To minimise noise production, the tool must be
sharpened and all elements for noise minimisation
(covers, etc.) must be properly adjusted.
Symbols
Before carrying out any work on
the machine, disconnect the plug
Always wear goggles when using
Caution!
Please read the instructions
carefully before starting the
machine.
from the socket.
the machine.
Wear ear protectors!
Wear safety shoes with steel
reinforcement!
Wear protective gloves!
Wear a respirator!
To be used outdoors only.
Publicité
Table des Matières
