Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Loosen locking nut (M5) on left blade inner guard,
7.
Then amount this guide plate(10) on the left blade inner guard, fasten locking nut (M5)and DO NOT fasten the
screw.
8.
Push the supporting leg (A) towards the blade, and make sure that this
9.
Put the inner flange, blade, outer flange and nut on the motor shaft. Hold outer flange with spanner and fasten the
nut by spanner.
Attention: Please pay attention the marking of the rotation direction on saw blade should correspond with the
rotation marking on the guard.
Blade right inner guard
Semicircle head inner-hex screw
- 76 -
guide plate
can be
operated
smoothly.
Publicité
Table des Matières
