Deactivation and disposal
If the machine can no longer be used and it is to be disposed, it
must be deactivated and disassembled, i.e. it must be put to a
state in which it may not be used for purposes for which it has
been designed. The process of disposal must consider the
recovery of basic materials of the machine. These materials
can be potentially reused in the recycling process. The
manufacturer rejects any liability for any personal or property
damage
incurred as a result of reuse of parts of the machine if
such parts are used for purpose other than the original
respective purpose. Machine deactivation: Each process
of deactivation or disposal must be performed by
staff trained for this purpose.
• The machine is disintegrated into parts.
• Block each moving part of the machine.
• Each machine element should be delivered to
certifi ed collection centres.
• Rubber parts should be removed from the machine
and delivered to a rubber parts collection centre.
• There is no other residual risk after deactivation and
blocking of the moving parts.
• Electrical structural elements are a special waste and
need to be disposed separately from the machine.
Approved extinguishers (e.g. powder extinguisher)
need to be used in case of fi re of the electrical
equipment of the machine.
Guarantee
Guarantee claims as per guarantee card attached.
The guarantee solely covers inadequacies caused
by material defect or manufacturing defect. Original
payment voucher with the sales date needs to be submitted
for any claim in the guarantee period.
The guarantee does not cover any unauthorised
use such as appliance overloading, use of violence,
damage as a result of any unauthorised interference
or caused by foreign items. Failing to follow the operating
and assembly instructions and common wear
are also not included in the guarantee.
ELECTRICAL SAFETY
- 64 -
WARNING: Packaging materials
are not toys! Children must not
play with plastic bags! Danger of
suffocation!
Always check that the power
supply corresponds to the
voltage on the rating plate.