Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
12. locking knob
ASSEMBLY
1 Unpacking
Danger!
Hazard generated by missing parts!
To prevent accidental starting that could cause possible serious personal injury, assemble all parts to your machine
before connecting it to power supply. This machine should never be connected to power supply when you are
assembling parts, making adjustments, installing.
Carefully remove all parts from the carton and place the machine on a level work surface. Separate and check against
the list of loose parts.
If any parts are missing, do not operate this machine until the missing parts are replaced. Failure to do so could result
in serious personal injury.
Do not discard the packing materials until you have carefully inspected the machine, identified all parts, and
satisfactorily operated this machine.
Note:
If any parts are damaged or missing, do not attempt to plug in the power cord and turn the switch on until
the damaged or missing parts are obtained and are installed correctly.
2 Loose parts list
A. Supporting leg (B) with motor
1pc
B. Supporting leg (A) with working table
1pc
- 68 -
Publicité
Table des Matières
