How To Use This Manual; Additional Safety Rules; Safety Instructions For All Saws - Panasonic EY45A5 Instructions D'utilisation

Original instructions: English
Translation of the original instructions:
Other languages
Read "the Safety Instructions" booklet
and the following before using.
I. INTRODUCTION
DANGER
This product is a cutting tool, designed to
cut through metal and wood. It has a
rotating blade which is capable of cutting
you deeply, causing serious injury or
death. As a result, please read this
manual and the cautionary markings on
the tool carefully, and obey all of the
Safety Instructions to avoid such injury.
WARNING
To avoid injury, never insert your finger
or any other object into any opening of
the tool.
WARNING
Read all safety warnings and all
instructions.
Failure to follow the warnings and
instructions may result in electric shock,
fire and/or serious injury.

How to Use This Manual

• Please read this manual completely
before starting to cut with your tool. If
you let someone else use the tool, make
sure they either read this manual or are
fully instructed in the proper use and all
safety precautions concerning the tool.
• Please keep this manual for future
reference. It contains important safety
information that you must follow to use
the tool safely.
• This manual and product use the
following signal words:
NOTE:
Notes provide additional information that
you should know about the tool.
CAUTION:
Caution indicates a potentially hazardous
situation, which could result in minor or
moderate injury if not avoided. Cautions
also alert you to unsafe practices to be
avoided.
WARNING
Warning indicates a potentially
hazardous situation, which could result
in serious injury or death if not avoided.
DANGER
Danger indicates an imminent hazard
which will result in serious injury or death
if not avoided.
II. ADDITIONAL
SAFETY RULES
Safety instructions for all
saws
DANGER
1) Keep hands away from cutting area
and the blade. Keep your second
hand on auxiliary handle, or motor
housing. If both hands are holding
the saw, they cannot be cut by the
blade.
2) Never hold piece being cut in your
hands or across your leg. Secure
the workpiece to a stable platform. It
is important to support the work
properly to minimize body exposure,
blade binding, or loss of control.
3) Use saw blades recommended by
Manufacture.
4) Wear a dust mask, if the work
causes dust.
5) Wear ear protectors when using the
tool for extended periods.
6) Never wear knitted gloves.
7) Be sure to inspect material. Avoid
cutting other different material.
8) Be careful not to drop the tool.
9) Never swing the tool.
- 11 -
EN