Philips S5000 Série Mode D'emploi page 26

ENGLISH
26
Note: Grab the comb in the centre to pull it off the
attachment. Do not pull at the sides of the comb.
2 Switch on the appliance.
3 Rinse the beard styler attachment and the
comb separately under a hot tap for some
time.
4 After cleaning, switch off the appliance.
5 Carefully shake off excess water and let the
beard styler attachment and comb dry.
Tip: For optimal trimmer performance, lubricate the
trimmer teeth with a drop of sewing machine oil every
six months.
Cleaning the nose trimmer attachment
Clean the nose trimmer attachment every time you
have used it.
1 Make sure the appliance is switched off.
2 Rinse the cutting element of the nose trimming
head with hot water.
3 Switch on the appliance and rinse the cutting
element once more to remove any remaining
hairs. Then switch off the appliance again.
4 Carefully shake off excess water and let the
nose trimmer attachment dry.
Tip: For optimal trimmer performance, lubricate the
trimmer teeth with a drop of sewing machine oil every
six months.