Philips S5000 Série Mode D'emploi page 23

2
1
3 Turn the retaining rings anticlockwise and
remove them.
4 Remove the shaving heads from the shaving
head holder. Each shaving head consists of a
cutter and guard.
Note: Do not clean more than one cutter and guard
at a time, since they are all matching sets. If you
accidentally put a cutter in the wrong shaving guard,
it may take several weeks before optimal shaving
performance is restored.
5 Clean the cutter and guard under the tap.
6 After cleaning, place the cutter back into the
guard.
7 Put the shaving heads back into the shaving
head holder.
ENGLISH
23