Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
10. Always wear eye protection that meets the
requirement of the latest revision of
ANSI Standard Z87.1.
11. This Jig Saw employs a high-power motor. If the
machine is used continuously at low speed, an
extra load is appplied to the motor which can result
in motor seizure. Always operate the power tool
so that the blade is not caught by the workpiece
during operation. Always adjust the blade speed
to enable smooth cutting.
12. Definitions for symbols used on this tool
V ............... volts
Hz ............. hertz
A ............... amperes
n
.............. no load speed
o
W .............. watt
............. Class II Construction
---/min ...... revolutions or reciprocation per
minute
.............. Alternating current
SAVE THESE INSTRUCTIONS
MAKE THEM AVAILABLE TO
OWNERS OF THIS TOOL!
AND
OTHER USERS
AND
DOUBLE INSULATION FOR SAFER
OPERATION
To ensure safer operation of this power tool, metabo HPT
has adopted a double insulation design. "Double
insulation" means that two physically separated
insulation systems have been used to insulate the
electrically conductive materials connected to the power
supply from the outer frame handled by the operator.
Therefore, either the symbol " " or the words "Double
insulation" appear on the power tool or on the
nameplate.
Although this system has no external grounding, you
must still follow the normal electrical safety precautions
given in this Instruction Manual, including not using the
power tool in wet environments.
To keep the double insulation system effective, follow
these precautions:
Only metabo HPT AUTHORIZED SERVICE CENTER
should disassemble or assemble this power tool,
and only genuine metabo HPT replacement
parts should be installed.
Clean the exterior of the power tool only with a
soft cloth moistened with soapy water, and dry
thoroughly.
Never use solvents, gasoline or thinners on plastic
components; otherwise the plastic may dissolve.
English
5
Publicité
Table des Matières
