Accessories; Standard Accessories; Optional Accessories - Metabo HPT CJ 110MV Instructions De Sécurité Et Mode D'emploi

English
WARNING:
NOTE: Accessories are subject to change without any obligation on the part of the metabo HPT.

STANDARD ACCESSORIES

No. 41 Blade (Code No. 879357) ......................................................................................... 1
Allen wrench (Code No. 944458) ........................................................................................ 1

OPTIONAL ACCESSORIES.....

No. 1 Blade (Long) (Code No. 879227)
No. 1 Blade (Super Long) (Code No. 321878)
No. 11 Blade (Code No. 963390)
No. 12 Blade (Code No. 963391)
No. 15 Blade (Code No. 963392)
No. 16 Blade (Code No. 963393)
No. 21 Blade (Code No. 963394)
No. 22 Blade (Code No. 963395)
No. 97 Blade (Code No. 963400)
Guide (Code No. 879391)
Sub base (Steel) (Code No. 321994)
Sub base (Resin) (Code No. 321995)
Special screw (Code No. 321996)
(For installation of the sub base)
Bench stand (Model TR12-B)
Splinter guard (Code No. 321590)
Dust collection adapter (Code No. 321591)
Chip cover (Code No. 325096)
NOTE: Specifications are subject to change without any obligation on the part of the
metabo HPT.
16

ACCESSORIES

ALWAYS use Only authorized metabo HPT replacement parts and
accessories. NEVER use replacement parts or accessories which are
not intended for use with this tool. Contact metabo HPT if you are not
sure whether it is safe to use a particular replacement part or
accessory with your tool.
The use of any other attachment or accessory can be dangerous and
could cause injury or mechanical damage.
sold separately