Publicité
Les langues disponibles
Les langues disponibles
Installation
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid
vibration and slipping while operating. Always ensure that the structure to which you are attaching the unit is secure
and able to support a weight of 10 times of the unit's weight. Also, always use a safety cable that can hold 12 times
the weight of the unit when installing the fixture.
The equipment must be fixed by professionals at a place where is out of the reach of people and where nobody can
pass by or under it.
Fuse Replacement
Disconnect the power cord before replacing a fuse and always replace with the same type fuse.
With a screwdriver wedge the fuse holder out of its housing.
Remove the damaged fuse from its holder and replace with exactly the same type of fuse.
Insert the fuse holder back in its place and reconnect power.
Warning: If after replacing the fuse you continue to blow fuses, STOP using the unit. Contact customer support for
further instructions. Continuing to use the unit may cause serious damage.
Features
1.
The unit is equipped with 10Pcs 3W CREE leds (2600K Warm White), in combination with 60Pcs SMD5050
RGB Leds. Every led can be controlled separatelyu.
2.
Excellent built-in programs for wonderful, ever changing, light shows.
3.
Excellent RGB color consistency while dimming down to 0%
4.
Completely silent operation, natural convection cooling system.
5.
All shows work in standalone, master/slave/Art-Net/Sound Control or DMX.
6.
2 different DMX channel modes for different applications.
7.
Backlit alphanumeric 2x 16character LCD-display for easy menu navigation
8.
ProCON in/outputs: easy daisy chaining of several units.
9.
3/5pin XLR DMX in/outputs.
10.
RJ45 In/out
11.
High efficiency and low power consumption!
12.
The multifunctional bracket, designed for both floor and truss mounting, allows to fasten optional omega
clamps.
Specifications
Power supply ........................................................................................ 110-240Vac 50/60Hz
LED light source ................................................................... 10x 3W warm white CREE LEDs
.............................................................................................. 60x 0.3W RGB SMD5050 LEDs
Color temperature ................................................................................... 2600°K (CREE led)
Fuse ...................................................................................................................F1.5A / 250V
DMX channels .............................................................................................................. 9/190
Dimensions ............................................................................................... 780 x 103 x 72mm
Weight ........................................................................................................................... 3.6kg
©Copyright LOTRONIC 2018
PIXCOLOR
Page 3
Publicité
