General Conformity Declaration - Becker Centronic SunWindControl SWC545 Notice De Montage Et D'utilisation

The system is not
extended automatically
when the sliding switch
is set to "".
The system does not
extended manually
when the sliding switch
is set to "" or "".

General conformity declaration

Becker-Antriebe
SunWindControl SWC545 complies with the basic requirements and other rel-
evant regulations of the EC Directive R&TTE 1999/5/EC.
For use in the following countries: EU, CH
Subject to technical changes without notice.
1. Sunlight intensity is
below the threshold
value.
2. Wind speed exceeds
threshold value.
1. Wind speed exceeds
threshold value.
2. Sensory equipment
or sensory equipment
connection defective.
3. Winter setting is set to
ON.
GmbH hereby
1. Adjust sun threshold
value.
2. Wait until wind abates.
1. Wait until wind abates.
2. Check the sensory
equipment.
3. Winter setting is set to
OFF.
declares that the device Centronic
47
de
en
fr
nl