Initial Operation; Factory Settings - Becker Centronic SunWindControl SWC545 Notice De Montage Et D'utilisation

Assembly and Operating Instructions
To activate the SWC545 control device, touch any button on the device. To se-
lect the language required use the +/- buttons and confirm your selection with
the OK button. The SWC545 is now in automatic operating mode.
TIME/DATE:
SETTING:
FUNCTION:
Note
Press the RESET button (with a ballpoint pen or similar object) to re-
store the factory settings in the SWC545 device.
Exception: Function and language selection menu.
34

Initial operation

Factory settings

current CET and current date
threshold value SUN t 04 and SUN s 03
DELAY t 3 min (EXPERT MODE)
DELAY s 15 min (EXPERT MODE)
END POSITION
SUMMER/WINTER ON
AWNING, EXPERT MODE OFF