Dishwasher Control Section; Dishwasher Feedback Section; Canceling A Cycle; Changing A Cycle After Dishwasher Is Started - Kenmore ULTRACLEAN 665.1452 Guide D'utilisation Et D'entretien

Control Lock Option
Use the Control Lock option to avoid unintended use of the dishwasher between cycles. When the Lock indicator is lit, all buttons
are disabled. The dishwasher door can still be opened or closed while the controls are locked.
To turn on the Lock:
Press and hold CONTROL LOCK for 3 seconds. The Lock indicator will light up. If you press any pad while your dishwasher is
NOTE: The dishwasher cannot start if the control is locked.
To turn off the Lock:
Delay Hours
hours when possible. Delay displays how many hours before the cycle will begin.
To delay the start:
1. Select a wash cycle and options.
2. Press 4 HOUR DELAY.
3.
NOTE:
again to resume the delay countdown.
Selecting Cycles and Options
1.
2.
Turning Off/On the Sound
1.
2. The dishwasher starts a drain cycle (if water remains in bottom of dishwasher). Let the dishwasher drain completely. The
1. See steps in the previous "Canceling a Cycle" section for canceling the current cycle.
2.
restarting your new cycle.
3. Select new cycles and options.
4.
1. Open the door slightly to stop the cycle. Wait for the spraying action to stop, then open the door completely.
2. If the detergent dispenser is still closed, you may add items to the load.
3. Close the door.
4.
18

Dishwasher Control Section

Dishwasher Feedback Section

Canceling a Cycle

Changing a Cycle After Dishwasher is Started

Adding a Dish After Dishwasher is Started