Auto Mode - Qlima Fiorina 74 S-line Manuel D'utilisation

4.
ECONO SEND
TURBO
AUTO
ON 1 OFF 1
ON 2 CANCEL OFF 2
ECONO
ECONO: Use this button to activate/deactivate the ECONO mode. Hold the
button down for at least 2 seconds to activate/deactivate this mode.
TURBO
TURBO: Use this button to activate/deactivate the TURBO mode. Hold the
button down for at least 2 seconds to activate/deactivate this mode.
CLOCK: To set the clock mode on the remote control, proceed as follows:
1. Press
2. The symbol appears and the time flashes.
3. Use the buttons to set the hours and minutes.
4. Press the again to confirm and press
ON 1
ON1: Use this button to set a schedule for switching the stove on automati-
cally (programme 1).
OFF 1
OFF1: Use this button to set a schedule for switching the stove off automat-
ically (programme 1).
ON 2
ON2: Use this button to set a schedule for switching the stove on automati-
cally (programme 2).
OFF 2
OFF2: Use this button to set a schedule for switching the stove off automat-
ically (programme 2).
AUTO
AUTO: Use this button to repeat the set timer programmes (1 and 2) dai-
ly. Hold the button down for at least 2 seconds to activate/deactivate this
mode. The display shows AUTO.
CANCEL
CANCEL: Use this button to cancel the programmed switch-on or switch-off
times.
SETTING THE TEMPERATURE
Use the and buttons (1&2) to set the desired temperature (from 7ºC to
40ºC). When the desired temperature has been selected, press
SETTING THE HEAT OUTPUT
Use the button (1) to select the desired heat output setting. Then push
(3). The text on1-on2-on3-on4 or on5 will appear on the stove. The power (2) will
also be shown on the remote control. You can also select Auto mode. See figure 6.

AUTO MODE

In this mode, the stove uses the difference between the desired temperature and
the room temperature itself to calculate the required output. To select auto mode,
press (1) until the
end auto mode, press
(2). See figure 7.
SEND
SEND
symbol appears. Press
SEND
(1) again, select the desired output and confirm with
.
(3). See figure 5.
SEND
(2) to confirm your choice. To
4
189
SEND