Burda RELAX GLASS FRAME SHORT IRA IP65 Manuel D'installation page 9

Masquer les pouces Voir aussi pour RELAX GLASS FRAME SHORT IRA IP65:

Les langues disponibles

7. Connect the heater to the power source, ensure the power is OFF. Ensure the power cable will not lay on the back of the

heater.

8. Lift the heater into the frame, ensuring the brackets go through the cut holes on the top of the frame shown in figure below.

9. Move the heater to the left direction and then drop in, ensuring the brackets place rightly on the hanger. Gently shake the

heater to ensure that it is securely mounted.