Beyerdynamic Amiron wireless Manuel D'utilisation page 8

8
Pairing with the player
Before you use the Amiron wireless for the first time, you have to pair it with your mobile
phone or another Bluetooth
may be different with various players. Please refer to the appropriate manual of the
player.
• When the Amiron wireless is turned off, press the button
®
the Bluetooth wireless technology mode. The LED
accordingly.
• Activate the Bluetooth
search for new devices.
• Select "beyerdynamic Amiron wireless" under the available devices in the Bluetooth
wireless technology menu of your player and pair both devices. Each time when
turning on, both devices are paired automatically.
Alternatively, you can connect the Amiron wireless with an NFC-capable playback device
through NFC. The Amiron must be switched on. It does not matter whether the Amiron
is in pairing mode or not.
• Activate the NFC function on your
playback device so that all necessary
information can be transmitted to the
playback device and a connection can
be established.
• Hold the NFC sensor of your playback
device to the lower area of the left head-
phone housing, because the NFC chip is
integrated there. Refer also to the NFC
logo in the drawing. Please note that the
exact positon of the NFC sensor of your
playback device is described in the
respective manual.
Pairing and clearing the list of players
If there are already several players in the list of your Amiron wireless and your Amiron
wireless cannot be paired with another new player, the list is full and should be cleared
so that the new player can be added.
This is how to clear the list:
• Hold down the button
so that the Amiron wireless will switch into the pairing mode and clear the list of
players simultaneously.
®
wireless technology enabled device. The pairing process
® wireless technology function on your player and, if necessary,
of the turned off Amiron wireless for more than 10 seconds,
Amiron wireless – Headphones
for 6 seconds to start
will rapidly flash blue and red
®