Beyerdynamic Amiron wireless Manuel D'utilisation page 16

16
Playback device settings for your best wireless sound
To achieve your best possible sound via Bluetooth
wireless, you should consider the following practical hints:
• Set the volume of the Amiron wireless to minimum, of the playback device to maximum.
From then on, adjust the volume on the Amiron wireless only, not on the playback device.
This applies only to playback devices that do not automatically synchronise the volume.
• On playback devices that automatically synchronise the volume (e.g. iPhone, iPad,
various Android smartphones), the headphones volume is always identical to the
volume of the playback device.
• Deactivate any audio effects that might exist in your player software.
• Ensure that aptX™ HD is switched on at the Amiron wireless, if supported by your
playback device.
Troubleshooting
Problem
Amiron wireless cannot be
switched on
No audio output
The Amiron wireless does
not appear among the
available Bluetooth
less technology enabled
devices on the playback
device
Playback volume is low,
despite the Amiron wire-
less volume is set to
maximum
Cause
Battery is empty or al-
most empty
No connection via
Bluetooth
technology
• The Amiron wireless is
switched off
®
wire- • The Amiron wireless is
not in pairing mode
• A connection via
Bluetooth
technology to another
playback device exists
already
The received audio signal
is too low
Amiron wireless – Headphones
®
wireless technology with Amiron
®
wireless
®
wireless
Solution
Charge the battery
Pair the Amiron wireless
with the playback device
• Turn on the Amiron wire-
less
• Put the Amiron wireless
into pairing mode
• Disconnect the
connection via
®
Bluetooth wireless
technology to the other
playback device and
connect the Amiron
wireless to the desired
device
Increase the playback
volume on the playback
device