GYS PRESS 8T Mode D'emploi page 21

Translation of
the original
notice
2- Insert the rivet extraction pin all the way into the gun, with the nozzle in contact with the sheet metal:
3- Operate the adapter according to the models below:
GYSPRESS 8T
Once the rivet has been pulled out of the sheet, release the trigger. For 8T and 10T riveters press the trigger below.
GYSPRESS 8T
Rivet and pin pop out at the front:
50KN BLIND RIVET ADAPTER FOR 10T RIVETER
GYSPRESS 8T PP
GYSPRESS 10T
GYSPRESS 10T GYSPRESS 10T PP
EN
GYSPRESS 10T Connect