Technical Specification - Build Worker BMS801-190 Traduction Des Instructions D'origine

D. of blade D. of inner
hole of
blade
(mm)
Ø 190 5/8"
No load
Net weight
speed
(kg)
-1
(min )
5500 4,5
Noise emission values measured according to relevant standard.
Acoustic pressure level
LpA 90.8dB(A) K = 3 dB(A)
Acoustic power level
LwA 103.80 dB(A) K = 3 dB(A)
Weighted root mean square acceleration according to relevant standard. :
< 2.5 m/s ²
The declared vibration total value has been measured in accordance
with a standard test method and may be used for comparing one tool with
another that the declared vibration total value may also be used in a
preliminary assessment of exposure.
A warning that the vibration emission during actual use of the power
tool can differ from the declared total value depending on the ways in which
the tool is used and of the need to identify safety measures to protect the
operator that are based on an estimation of exposure in the actual conditions
of use (taking account of all parts of the operating cycle such as the times
when the tool is switched off and when it is running idle in addition to the
trigger time).

TECHNICAL SPECIFICATION

(S1)
Thickness of
balde (mm)
1,2-1,8
ATTENTION !
The sound power
pressure may exceed
85 dB(A), in this case
individual hearing
protection must be
worn.
K = 1.5 m/s²
800W
S2 :2min
Max. cutting Rated
depth x width volt (V)
(mm)
45x110
3
Rated
frequency
(Hz)
230 50
Nominal input
capaity (A)
8,5