Operation; Electrical Connections; Maintenance / Cleaning - Vortice CA ES Série Notice D'emploi Et D'entretien

ENGLISH
model, as described above. The restoring of nominal
values is indicated by two quick flashes of an LED
on the card.
The motor is deactivated automatically
- cut off the power supply
- reset the dip-switch SW2 indicated
in the figure:
Int.3=OFF

Operation

Depending on the mode selected during installation:
- two-speed mode:
continuously; two speeds V1 and V2 can be selected
using an external switch
- adjustable speed mode: the appliance can operate
at a speed which is adjusted between 300 Rpm and
Vmax (via an external potentiometer). The Vortice
ON/OFF control box + potentiometer (code 12826,
on request) can also be used.

Electrical Connections

Fig. 13 ÷ 17.

Maintenance / Cleaning

Fig. 18,19,20.
ON
OFF
1 2 3 4
the appliance operates