EN
LOGICA TWIN MID OPERATING AND MAINTENANCE MANUAL
Once the ECC - Effegibi Comfort Control function has been activated, the Hammam can be programmed
remotely using the Effegibi Experience app.
This app makes it possible to pre-programme the Hammam to switch on and off remotely.
To deactivate the ECC - Effegibi Comfort Control function, hold down the SAUNA button for about 3 seconds.
When the Remote LED goes off it indicates that the ECC - Effegibi Comfort Control function has been
deactivated.
N.B.: the ECC - Effegibi Comfort Control function cannot be activated if remote activation is operated by
cable.
If the Hammam is in a public place or if the remote activation has to be operated by cable, contact an
approved service centre or the company direct.
6.10
PROGRAMMING
The Effegibi Experience app makes it possible to programme the Hammam to switch on at a precise time on
a particular day of the week.
At 3.00am on the programmed day, the Remote LED will start to flash (see Fig. C).
fig. C
The daily program can be deactivated manually just by pressing the Sauna button.
If one daily program is deactivated, all the settings for that day will be cancelled.
If a new program has been set for the following day, the panel will switch on at 3.00am on that day.
N.B.: programs are controlled by the ECC - Effegibi Comfort Control function, which, if disabled, will cancel
them.
62
The data and features referred to are not binding on EFFEGIBI and the company reserves the right to make any appropriate changes without having to give prior warning or
70
80
60
50°C
replace this manual.
90
100°C