LOGICA TWIN MID OPERATING AND MAINTENANCE MANUAL
1.3
MANUFACTURER'S IDENTIFICATION DETAILS
Your product has been entirely manufactured and distributed by
1.4
KEY TO SYMBOLS
When consulting this manual, whenever you find these symbols, read the accompanying information very
carefully because it is of vital importance for using your "Logica Twin Mid" properly. Failure to follow the
instructions can cause damage to people and/or property.
HAZARD – WARNING
Indicates a major hazard which, if ignored, may put personal health and safety seriously
at risk.
CAUTION-PRECAUTION
Indicates that it is necessary to behave in such a way as to avoid accidents and/or
cause damage to people or property.
N.B.
N.B.
Indicates highly important technical information not to be ignored.
Prohibited action
1.5
PERMITTED USAGE
The product must be used exclusively in the ways and for the purposes for which
it was designed. Any other usage is to be considered improper and therefore
hazardous.
Improper operations are considered those that involve making any modifications
not expressly approved by the manufacturer.
N.B.
The manufacturer refuses to accept any liability for injury or damage caused by
improper use of the equipment.
Since the equipment contains live electrical components and hot surfaces, all servicing and/or maintenance
operations must be carried out by properly qualified personnel with knowledge of the necessary precautions.
The data and features referred to are not binding on EFFEGIBI and the company reserves the right to make any appropriate changes without having to give prior warning or
EFFEGIBI S.R.L.
Via Gallo 769, 47522 Borello di Cesena (FC)
Tel. +39 0547/372881 - Fax +39 0547/372924
info@effegibi.it - www.effegibi.it
replace this manual.
EN
43