Operation; Power Button - Renkforce TP-1010USB Mode D'emploi

9. Operation

Only take the device into operation after familiarising yourself with its functions and these operat-
ing instructions.
Check all the connections again.

(1) POWER button

This button switches the cassette deck on and off.
(2) Cassette drives
The cassette is inserted here.
The device has two drives:
Deck A is used for playback only
Deck B can play back record.
(3) Display
Here, the signal levels at recording or playback mode and the operating conditions are displayed.
(4) Tape Counter for Deck B
With the help of this tape counter, you can find specific points of the tape.
Push the button next to the counter to reset it to 000.
(5) Controller REC LEVEL
This controller is used to adjust the signal level in the recording. Only active when recording external audio sources
via the LINE REC/IN input. When recording from deck A, the recording is balanced automatically.
24