Safety Devices; Safety And Information Signs - Ndustrio 0G1CP1EC Manuel D'utilisation Et D'installation

SAFETY DEVICES

Although the appliance is complete with all safety
devices, during installation and connection addition-
al devices must be added if necessary to comply
with the relevant legal requirements.
The illustration shows the position of the devices.
A)Safety thermostat: cuts off the electricity supply
in case of overheating.
Caution - warning
Make a daily check that the safety devices are
properly installed and in good working order.

SAFETY AND INFORMATION SIGNS

The illustration shows the position of the signs pro-
vided.
IT
A)Nameplate with manufacturer and appliance
data.
GB
B)Burn hazard: watch out for hot surfaces.
C)General hazard: read the manual carefully be-
DE
fore carrying out any procedure.
D)General hazard: when washing the appliance do
FR not point pressurised water jets at internal parts.
E)General hazard: dry operation is forbidden.
F) General hazard: all relevant regulations must be
ES
complied with. "Install in compliance with the rel-
evant regulations and use in well ventilated
premises only".
G)General hazard: all relevant regulations must be
complied with. "No liability is accepted in case of
failure to compy with the installation and commis-
sioning instructions".
H)CE marking: indicates that the appliance is com-
pli-ant with the relevant norms.
L) WEEE symbol: indicates that the appliance is
sub-ject to specific waste disposal regulations.
English
A
A
B
- 4 -
0G1CP1EC
IDM-39613600200.tif
0G1CP1E
IDM-39611700200.tif
D C
A
L
G
F
IDM-39603600300.tif
E
H