Attaching the front panel
Place the front panel on the front side of the unit
as illustrated, then lightly push the front panel
into position until it clicks.
Press (SOURCE) (or insert a disc) to operate the
unit.
Note
Do not put anything on the inner surface of the front
panel.
Setting the clock
The clock uses a 24-hour digital indication.
Example: To set the clock to 10:08
1
Press (MENU), then press M or m
repeatedly until "Clock" appears.
1 Press (ENTER).
The hour indication flashes.
2 Press M or m to set the hour.
3 Press ,.
The minute indication flashes.
4 Press M or m to set the minute.
2
Press (ENTER).
The clock starts. After the clock setting is
completed, the display returns to normal play
mode.
Tips
• You can set the clock automatically with the RDS
feature (page 19).
• When D.Info mode is set to on, the time is always
displayed (page 22).
9