Important - Frigidaire Gallery Série Instructions D'installation

MICROWAVE/ WALL OVEN COMBINATION
6. Install the Anti-tip Mounting Screws
The wall oven can tip when the door is
open. The anti-tip mounting screws supplied with the
wall oven must be installed to prevent tipping of the
wall oven and injury to persons.
A. The mounting holes in the side trims may be
used as a template to locate the appliance mounting
screw holes (see fi gure 6).
B. Use the two screws supplied to fi x the appliance
to the cabinet.
Figure 6
Tip Over Hazard
• A child or adult can tip the oven
and be killed.
• Install the anti-tip device to oven
and/or structure per installation
instructions.
• Ensure the anti-tip device is re-engaged when the
oven is moved.
• Do not operate the oven without the anti-tip device
in place and engaged.
• Failure to follow these instructions can result in
death or serious burns to children and adults.
Anti-tip mounting holes
INSTALLATION INSTRUCTIONS
Refer to the installation
instructions supplied with your
appliance for proper installa-
tion.
Check for proper installation
with a visual check that the
anti-tip screws are present.
Test the installation with light
downward pressure on the
open oven door. The oven
should not tip forward.
7. Install the Bottom Trim
IMPORTANT: Bottom trim must be installed for the
oven to function properly. DO NOT operate the oven
without the bottom oven trim installed.
Place the top of the bottom trim over the side trim
tabs on each side of the oven below the oven door
and fi x it using the 2 screws supplied in the mounting
holes located on each side trim below the oven
frame (see Figure 7).
Bottom Trim
Screws
supplied
5
Figure 7