Stand-Alone Operation - HQ Power VDPLW1308BI Mode D'emploi

b. Front and Side Panel Functions
c. Stand-alone Operation
• Press the MODE button to view the chase menu
Select chases 1-9 using the UP and DOWN buttons.
Chase 1-8 run according to the fade and speed values.
Chase 9 is SOUND-active.
• Press the F/S button to set the fade and speed values
• Adjust the chase fading time from 0-100%
• Adjust chase speed from 0-500 steps per minute
d. Manual RGB Adjustment
Find the manual RGB adjustment menu by pressing the MODE button. Press F/S to select the desired colour for
adjustment, use UP and DOWN to adjust the value.
VDPLW1308BI
DMX mode (1 – 512)
DMX address selection
for Pixel Drive 80
Stand-alone mode
1 – 8 = auto Chase
9 = sound chase
Fixture control mode
Select mode 1, 2, 4 or 8
Manual RGB colour mixing
Press F/S to begin
Use UP / DOWN to adjust
Adjust the chase fading time
from 0 -100%
Adjust the chase speed
from 0 – 500/min
Indicates RED from dark to bright.
3
DMX512 output
DMX512 input
Microphone
Audio level
Power cord
Fuse
Power ON/OFF
VELLEMAN