Installation; Plumbing And Electric Connexion - Casselin CLV35 Mode D'emploi

own and other people's safety and to ensure a perfect use of the appliance.
If the appliance is sold or transferred to someone else, ensure that the manual is with it.
Read this operating manual completely before installing and working with the appliance.
We do no accept any reponsibility for damages due to non observance of these operating
instructions.
Safety instructions are dedicated to avoid mistakes, and provide important information for
insuring safe installation, use and maintenance of the appliance. Consequently the appliance
must be used for the purpose for which it was expressly designed. Any other use is considered
to be improper and consequently dangerous. The appliance is conceived according to the
current technical rules. It must be used in close buildings, only by one responsible person.
Non-compliance with using instructions can lead to serious injuries or damage to the
appliance. We take no responsibility for damages due to violations of the operating
instructions. Any intervention work on your appliance must be performed by qualified
professionals.
This appliance has been conceived for fixed connexion.
Never let packaging such as plastic bag, polystyrene, nails... accessible to children.

2. Installation

Immediately contact your dealer if you have found damage resulting from transport. In case of
packaging damaged you can refuse the parcel or accept it but with the mention of the damage
on the delivery document.
Unpack the appliance with all its accessories. Check the contents for completeness and
possible damages.
The damages will be considered receivable if a detailed claim is send to the dealer within the
intended deadlines
Screw adjustable feet under the base in the threaded parts reserved for this purpose. Put the
machine in place, ensuring that it is leveled by rotating adjustable feet. The appliance can be
installed under the counter, in this case the side and rear walls may join the wall or adjacent
appliance but it must be left a distance of 2 cm at least in the upper part.
To avoid possible damage to the normal exhaust steam, ensure that the adjacent material to
the machine does not deteriorate on its contact.
Before connecting the machine to the water and power supply check the conformity with the
information written on the data plate (C-3) carefully take into account during the various stages
of the installation. Parts supplied by the manufacturer were only able to ensure full compliance
of our machines with data schemas, any repairs must be made with original parts. Repairs
carried out by non-qualified technician and with non-original spare parts will invalidate the
warranty.

3. Plumbing and electric connexion

Water supply
Before connecting the appliance, make sure that there is a gate valve between the appliance
and the water mains in order to be able to shut off the water supply when necessary or in case
of repair. Your appliance is fitted with a non-return valve placed on the water supply line, in
conformity to the EN50084 normative.
Version 270114
17