switel DE 36 Série Mode D'emploi page 32

Resetting the handset (delivery state)
☞
The handset will be resetted to the delivery state - the entries in the
phonebook, the caller list and the redial list will be deleted.
... press, select HANDSET using ¦ / ‹ and press
¦ / ‹
Select RESET and press
Confirm the safety request by pressing
delivery state).
Dialling mode (Tone / Pulse)
☞
You can switch the dial mode. In most situations the TONE option
should be selected.
... press, select BASE using ¦ / ‹ and press
¦ / ‹
Select DIAL MODE and press
¦ / ‹
Select TONE or PULSE and press
or
... press and hold for approx. 3 s. T (Tone) or P (Pulse) appears in the
display.
Flash time
☞
You can set the flash time to 100 ms (usually for special services of
your telephone provider/delivery state) or 300 ms (e. g. for a telephone
exchange). In case of questions please contact your telephone provider or
the system administator of your PBX.
... press, select BASE using ¦ / ‹ and press
¦ / ‹
Select RECALL and press
¦ / ‹
Select SHORT or LONG and press
or
... press and hold for approx. 3 s. S (100 ms) or L (300 ms) appears in
the display.
System PIN
☞
In delivery state the PIN is set to "0 0 0 0".
The PIN is valid for all registered handsets.
... press, select BASE using ¦ / ‹ and press
¦ / ‹
Select SYSTEM PIN and press
Enter the old PIN and confirm by pressing
Enter the new PIN twice and confirm each by pressing
6
.
.
and enter the PIN (0 0 0 0 in
.
.
.
.
.
.
.
.
.
.
Registering a handset
☞
Five handsets can be registered to a base station. The handsets deli-
vered with your telephone are already registered. To register a "foreign"
handset please refer to it's user manual.
First of all disconnect the base station from the mains and re-connect it.
After this the base station will be in registration mode for one minute.
... press, select REGISTER using ¦ / ‹ and press
¦ / ‹
Select a base station to subscribe to and press
Enter the base's PIN (DE 36x base station in delivery state "0 0 0 0") .
Deleting a handset
☞
You can delete a handset from a base to allow another handset to be
registered. Note: you can only remove other handset in your system but
you are not able to remove the handset you are using.
... press, select DE-REGISTER using ¦ / ‹ and press
... press and hold for approx. 3 seconds.
Enter the PIN for the base station (DE 36x base station „0 0 0 0").
Enter the internal telephone number (1...5) of the handset you want to
remove.
.
.
.