4 Telephoning
Taking a call
Your phone is ringing.
Press the call key.
Making a call
Enter the phone number.
Delete wrong characters by pressing
The phone number is being dialled.
☞
You can also press the call key and you will hear the dialling tone.
The entered number will be dialled immediately. It is not possible to
correct wrong digits individually using this dialling procedure.
Ending a call
Press the call key or replace the handset in the base station.
/
Activating Hands-free
When you are in a call you can switch on/off the loudspeaker.
appears in the display when the loudspeaker is on.
Call timer
Your handset automatically times the duration of every call.
Setting the earpiece/loudspeaker volume
During a call you can adjust the volume in 5 levels (if telephoning "nor-
mally" -> earpiece volume, with hands-free -> loudspeaker volume).
Muting the microphone
During a call you can switch your handset's microphone off. The display
shows
.
To unmute press
again.
Redial
☞
Your handset saves the last 3 dialled telephone numbers.
Viewing/dialling telephonenumbers
The handset is in idle state.
... press repeated (if necessary) until the desired telephone number is
displayed.
... the phone number is being dialled.
☞
Did you already pressed the call key and can hear the dialling tone, the
very last dialled telephone number is dialled by pressing the redial key.
.
Storing telephone numbers
... the desired telephone number is displayed (see above).
... press. Select SAVE TO PB if necessary and press
name and press
. Edit the telephone number if necessary. Press
briefly for deleting the last character or press and hold for deleting
the whole number. You can enter a dialling pause (approx. 3 s) by press-
ing
.
... press again to select a melody for the entry.
... press to store the entry.
Deleting telephone numbers
... the desired telephone number is displayed (see above).
... press. Select DELETE or DELETE ALL if necessary and press
The entry or all entries will be deleted.
Call list
☞
Your handset saves the numbers of the last 20 incoming calls in the
call list. Saving can only take place if the function "Phone number transmis-
sion (CLIP)" is available at your connection and caller ID is not suppressed
by the caller or was not transmitted for any other reason.
If the list is empty, EMPTY is shown on the display.
New calls are signalled with the flashing
Viewing/dialling telephone numbers
The handset is in idle state.
Open the call list. The name (if entry in the phonebook) or the telephone
number of the very last call is displayed. For numbers longer than 12 dig-
its press
to display the hidden digits.
Press
to view date and time of the call (only if available at your con-
nection).
... press repeated, to get to other entries.
... the displayed telephone number is being dialled.
Deleting telephone numbers
... the desired telephone number is displayed (see above).
... press. Select DELETE or DELETE ALL if necessary and press
The entry or all entries will be deleted.
Storing telephone numbers
... the desired telephone number is displayed (see above).
... press. Select SAVE TO PB if necessary and press
. Enter the
.
icon.
.
GB
. Enter the
3