Teac PD-H01 Mode D'emploi page 27

Removing tracks from the program
Press the CLEAR button to remove the last track added to
the program .
o Repeat this procedure to remove multiple tracks from
the program .
Removing all tracks from the program
Press the PROGRAM button to exit program mode . When
you do this, all tracks are cleared from the program,
"CONTI" appears on the display and ordinary playback
mode resumes .
Any of the following operations will also clear all the tracks
from the program .
o Ejecting the disc
o Pressing the unit's STANDBY/ON button to put it in
standby mode
o 30 minutes pass without any audio output or operation
and the unit enters standby mode automatically
Adding tracks to the program
When in program mode (either during playback or when
stopped), selecting a track with the number buttons will
add it to the end of the program .
EN
27