Teac PD-H01 Mode D'emploi page 29

Playback is not
CD
possible.
The sound skips.
Since this unit uses a microcontroller, external noise and other interference can
cause the unit to malfunction . If this should occur, turn the unit off and wait a little
while before turning the unit on again and retrying the operation .
If the disc is upside down, reload it with the labeled
side up .
If the disc is dirty, wipe it clean .
Depending on the quality and recording conditions
of the disc, some CD-R/CD-RW discs cannot be
played back .
CD-R/CD-RW discs that have not been finalized cannot
be played back .
Vibrations can cause the sound to skip . Install this unit
in a stable location .
If the disc is dirty, wipe it clean .
Do not use scratched, damaged or warped discs .
EN
29