Krüger & Matz KM0530 Mode D'emploi page 14

Bluetooth
1. Make sure the speaker is turned on.
2. please keep the speaker and external device close to each other when pairing.
3. press External input button to enter Bluetooth pairing mode.
4. Enable the Bluetooth function on the external device and search for new
Bluetooth devices.
5. Select and connect with this device (kM D18- kM0530; kM D19- kM0531).
6. The speaker will issue a sound signifying successful pairing.
Notes:
• Every time the speaker is switched on, it will connect to last connected device
automatically. please note, your device must be on with Bluetooth function
turned on.
Charging
1. Connect the speaker to the power supply mains with the included charging
adapter.
2. When the battery is charging, red LED is on.
3. When the battery is fully charged, green LED is on.
Notes:
• Please be sure the battery has been charged fully before first use.
• Charge the battery regularly to keep it in good condition.
Troubleshooting
Problem
No electricity
No sound
poor microphone sound quality
No microphone sound
14
Possible solution
• Make sure the battery is charged
• Make sure the power is on
• Make sure the volume is not set to the minimum
• Decrease the volume
• keep a proper distance between the microphone and
the speaker
• Make sure the microphone is switched on
• In case of wired microphone, make sure the
microphone is connected to the speaker
• In case of wireless microphone, replace the batteries
• Make sure the volume is not set to the minimum
Owner's manual